
NATF Admin
- Total activity 30
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 15
Activity overview
Latest activity by NATF Admin-
NATF Admin created an article,
(6.2) Facility Safety
The Natonal Axe Throwing Federation maintains rigorous and evolving standards to ensure the safety of both throwers and spectators. Pre-Throwing Visual Inspection Target inspection: Replace w...
-
NATF Admin created an article,
(6.1) Throwing Safety
General Safety Axe must be wooden handled; Axe must be sheathed when not throwing; Only one player per target permitted in the arena; Do not approach the target until both axes in a pair of lane...
-
NATF Admin created an article,
(5.2) Big Axe Specifications
Big Axe (Felling Axe): see image 2.2 below A Big Axe (Felling Axe has the following requirements The axe head must weigh between 2.25 and 2.75 pounds The handle must be wood, handle length must ...
-
NATF Admin created an article,
(5.1) Standard Axe (Hatchet) Specifications
Standard Throwing Axe (Hatchet) Requirements: see image 2.1 below The handle must be made made from wood, no other material is allowed; Handle Length: The length must be a minimum of 13” lon...
-
NATF Admin created an article,
(4.3) Axe Throwing and Perimeter Lines
NATF arenas have 4 throwing lines: The solid Red Fault line The solid Black standard throwing line The thin, perforated Blue Big axe throwing line The solid Yellow perimeter line These lines mus...
-
NATF Admin created an article,
(4.2) Target Dimensions
Target Rings The centre of the bullseye sits in the centre of the middle 2X10 [note that a 2x10 is actually 9 1/2 inches wide thereby making the centre 4 5/8"]: Bullseye is 7" in diamet...
-
NATF Admin created an article,
(4.1) Sub-Frame and Target Construction
Sub-frame All National Axe Throwing Federation targets require at least one sub-frame layer directly behind the backboard, 1 ½ inches deep; whether targets are mounted on a concrete wall, or on...
-
NATF Admin created an article,
(3.1) Big Axe Tiebreakers
Paint to Points Taking place for the NATC in February 2019 and for all NATF tournaments moving forward. We will be eliminating the 'paint then points' rule for big axe throws in tournament comp...
-
NATF Admin created an article,
(2.2) Playoff Scoring
Scoring during playoffs has 2 variations when compared to regulation scoring, all other rules remain unchanged: Each round in a playoff match must have a winner: If a round ends in a tie, it ...
-
NATF Admin created an article,
(2.1) Playoff Format
Standard league playoffs are a 16 person double elimination tournament: Double Elimination means players must lose twice to be eliminated from the tournament. See Image 4 below The fina...